Verilink WANsuite 6450, Reference Manual

Page: 117 / 205

V T 1 0 0 I n t e r f a c e 4-9
Configuration Profiles Screen
Selecting the “Configuration Profiles” prompt on the Network screen will
display the screen shown in Figure 4.8.
Figure 4.8 Configuration Profiles Screen
This screen displays the following information for each available Span
Configuration Profile:
Configuration Name Name of the defined span configuration profile.
Wire Mode Type of wire interface used by the span.
Data Rate (Min) Minimum attainable data rate in the span.
Data Rate (Max) Maximum attainable data rate in the span.
Remote Indicates whether the option to span remote is enabled or disabled.
Trans Mode Regional setting of the span. The possible settings are Annex-A (ITU-T
G.991.2), Annex-B (ITU-T G.991.2).
Select the particular profile for which you want to see details by selecting
from the <Configuration Name> on the Configuration Profile screen and then
pressing the “Enter” key. The Configuration Details screen (Figure 4.9)
supports the overall configuration of the spans.