VEMAG 160.0215 Operating Instructions Manual Download Page 61

Page: 61 / 182

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E

6. Graphical control

6-15

6.5.3 Select mode group, mode and view

In the

Operating mode

field you can select mode group and mode and set

the view required for each application. The modes which can be selected

are determined by the machine type and the machine configuration.

You can also save settings here and select the Service pages and your

language.
• Press the

Operating mode

function key.

• Select the

Operating mode group

field using the

cursor key

• Press

Enter.

A list of the possible mode groups is displayed.

• Select the mode group using the

Cursor keys

• Press

Enter.

• Select the

Operating mode

field using the

cursor key

• Press

Enter.

A list of the possible modes is displayed.

• Select the mode using the

cursor keys

• Press

Enter

• Select the

View

field using the

cursor key

• Press

Enter.

A list of the possible views and supplementary

parameters for the selected mode is displayed.

• Select the view using the

cursor keys

. Views followed by ".." show that

more pages follow.

• Press

Enter.

To set your language

Section 6.5.5

Summary of Contents for 160.0215























































































































































































Search results

Summary of Contents for 160.0215

Reviews:

VEMAG 160.0215, Operating Instructions Manual, Page: 61 / 182

Search results

Summary of Contents for 160.0215

Reviews: