VEMAG 160.0215 Operating Instructions Manual Download Page 126

Page: 126 / 182

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E

7. Cleaning

7-14

7.4.4 Specialist cleaning agent for machine interior

Check inside the machine regularly for the build-up of germs and dirt.

Clean the inside of the machine if the dirt is excessive.
Clean smeared or dirty areas inside the machine as follows:
• Spray the cleaning agent onto smeared and dirty areas and wipe off

immediately with a dry cloth. Alternatively, spray the cleaning agent

onto the dry cloth and use this to wipe off dirt and smudges.

Warning!

Disconnect the machine from the mains before using the cleaning agent.

Do not use the cleaning agent in parts that are in contact with the pro-

duct.

Do not spray the cleaning agent directly onto control panels, electrical

parts or cables.

Recommended cleaning agent:

Europe

USA

Application

Characteristics

Cleaning

Manual

Spray

RIVOLTA S.L.X.

Rapid Aerosol

Industrial cleaner for use in the

food industry

Summary of Contents for 160.0215























































































































































































Search results

Summary of Contents for 160.0215

Reviews:

VEMAG 160.0215, Operating Instructions Manual, Page: 126 / 182

Search results

Summary of Contents for 160.0215

Reviews: