VEMAG 160.0215 Operating Instructions Manual Download Page 122

Page: 122 / 182

ROBOT HP7E / HP10E / HP12E / HP15E / HP20E

7. Cleaning

7-10

7.3 Cleaning the machine

Clean the machine housing, the hopper, the feed screw, the linking gear

(optional) and all the parts which have been removed thoroughly with hot

water and a brush and then dry them. The machine is suitable for clea-

ning with low-pressure cleaning equipment (max. 25 bar).

Warning!

Never aim the jet of water directly at the double screw drive, the sealing

elements and the machine control panel when using low-pressure clea-

ning equipment and keep the nozzle at the distance from the surface of

the machine specified for the cleaning equipment.

In addition to the instructions in the cleaning schedule, generally-applica-

ble and product-specific hygiene regulations should be followed.
When cleaning the double screws, pay particular attention to the joints

between the screw and the coupling claw (1).

1 Joint

Fig. 7-16

Double screws

Summary of Contents for 160.0215























































































































































































Search results

Summary of Contents for 160.0215

Reviews:

VEMAG 160.0215, Operating Instructions Manual, Page: 122 / 182

Search results

Summary of Contents for 160.0215

Reviews: