45 / 77
15-4-2. Mask State
•
Turns on or off the selected masking zone.
•
Move the cursor to [MASK STATE] and press [LEFT] or [RIGHT] button to change the State.
¾
Select in between ON and OFF
15-4-3. Mask Color
•
Selects the color for the masking.
•
Move the cursor to [MASK COLOR] and press [LEFT] or [RIGHT] button to change the State.
>Can be selected in between GRAY, YELLOW, GREEN, RED, BLUE, BLACK, and WHITE.
15-4-4. Size of the Masking Zone
•
Configures the size of the selected Masking zone.
•
Move the cursor to [WIDTH] or [HEIGHT] and press [LEFT] or [RIGHT] button to change the value.
¾
WIDTH: Changes the width of the Masking zone.
¾
HEIGHT: Changes the height of the Masking zone.
15-4-5. Location of the Masking Zone
•
Configures the location of the selected Masking zone.
•
Move the cursor to [MOVE X] or [MOVE Y] and press [LEFT] or [RIGHT] button to change the value.
¾
Move X: Moves the Masking zone horizontally.
¾
Move Y: Moves the Masking zone vertically.
15-4-6. Reset Mask
•
The configured size and location on the selected masking zones can be set back to the initial state.
•
Move the cursor to [RESET MASK] and press [menu Set] button for reset.
15-4-7. INITIAL SET (same for all sub menus)
15-4-8. PREVIOUS (same for all sub menus)
16. OSD Setup Menu
•
In the main menu screen, move the cursor to [OSD SETUP] and press [menu Set] button to go into the [OSD SETUP] screen.
Summary of Contents for VP-ATDN12X
Page 2: ......
Page 11: ...7 77 2 3 TECHNICAL PARAMETERS VP ATDNC12X VP ATDNC12X...
