17 / 77
The Presets store the coordinates according to an angular reference system. Therefore, the reference system zero point may
become misaligned with the camera mechanics after prolonged use of the tilting and panning functions. Minor inaccuracies in
preset positions may occur. In this case, calibrate the angular coordinate system using the
REBOOT SYSTEM
command. This
calibration is automatically run when the camera is switched on.
4.5. FUNCTION PROGRAM MENU
Use the following control panel command to access the function programming menu.
95
+
CALL
At this point, if no password is required for access, the following first level menu will appear on the screen:
Screen 1: Main Menu
If a password is required, the following prompt will appear. The password is a numeric combination (max. 4 digits).
MAI N MENU
- - - - - - - - - - - - - - - - - - - - - - - - - -
- -
1. <SYSTEM>
2. <CAMERA>
3. <PTZ>
4. <ALARM>
5. <TRACK>
6. <EVENT>
7. <SET DEFAULT>
8. SYSTEM REBOOT
9. BACK
10. EXI T
Summary of Contents for VP-ATDN12X
Page 2: ......
Page 11: ...7 77 2 3 TECHNICAL PARAMETERS VP ATDNC12X VP ATDNC12X...
