60 / 77
PROGRAM
PATTERN
This submenu is used to program a pattern (see
below)
CLEAR PATTERN
This submenu is used to delete a pattern (see
below)
Table 19
PROGRAM PATTERN submenu
This includes all the operations needed to program a pattern.
1)
Use the joystick to point the cursor to the "
PATTERN NUMBER
” option.
2)
Select the required pattern and press
OPEN
.
3)
Position the cursor under
“
PROGRAM PATTERN
” option and press the
OPEN
button.
The number of actions available (including zoom operations) for programming the Pattern is shown in percentage form on the screen while
they are each being programmed. 100 operations are available for each pattern.
CLEAR PATTERN submenu
This includes the operations for deleting the selected pattern.
4.5.3.4.
POWER UP
Screen 31: Power UP Sub-Menu
Option
Value
Explanation
ACTION
NONE
No action is performed at the end of power
up.
AUTO SCAN
The camera performs an auto scan at the
end of power up: the camera performs a
360 horizontal scan operation.
POWER UP
- - - - - - - - - - - - - - - - - - - - - - - - - -
-
1. ACTI ON: NONE
2. BACK
3. EXI T
Summary of Contents for VP-ATDN12X
Page 2: ......
Page 11: ...7 77 2 3 TECHNICAL PARAMETERS VP ATDNC12X VP ATDNC12X...
