11 / 77
4. OPERATION GUIDE
4.1. OPERATION AT POWER UP
The camera employs the default settings the first time it is switched on. Changes to the settings will be permanently stored and will be
made available the next time the camera is switched on. You can return to the default settings by means of the appropriate menu option at
any time.
The camera will work as follows when it is switched on.
The camera will run a calibration procedure and a message showing the following information will appear on the video output OSD
(On Screen Display): software version, address, protocol, baud rate and zoom module brand.
Check that the data are suitable for operation. Otherwise, refer to the section in this document that shows how to install the camera
correctly.
At the end of the calibration step, the camera will switch to stand-by as programmed (
PTZ > POWER UP > ACTION
). The camera will
continue working this way until any command is received from the keypad. The camera during this phase can be pointed to a fixed point or
pan across the field. Refer to the details described in the
POWER UP
menu section.
MI NI DOME I I
SOFT VERSI ON:
5. 3
ADDRESS: 1
PROTOCOL: PELCO
－
D/ P
BAUD RATE: 2400
TEMPERATURE 25C
SAMSUNG SERI ES CAMERA
Summary of Contents for VP-ATDN12X
Page 2: ......
Page 11: ...7 77 2 3 TECHNICAL PARAMETERS VP ATDNC12X VP ATDNC12X...
