34 / 77
¾
NIGHT: Always in Night mode. (IR-CUT filter disengaged all the time)
¾
EXT: Mode changes according to an external signal.
¾
CDS: Mode changes according to the CDS SENSOR.8-2. Day/Night Level
8-2. Day/Night Level
•
Changes the light level for Day/Night switching
•
Move the cursor to [D/N Level], and change the value using [LEFT] or [RIGHT] button.
¾
Can be changed in between 0 and 10, where 5 is the normal value. (Switching light level is 0<5<10)
8-3. Day/Night delay
•
Sets the delay time for Day/Night switching
•
Move the cursor to [D/N Delay], and change the value using [LEFT] or [RIGHT] button.
¾
Can be set in between 5 ~ 60 seconds.
8-4. INITIAL SET (Same for all sub menus)
8-5. PREVIOUS (Same for all sub menus)
9. Backlight Menu
•
In the Main Menu, go into the [BACKLIGHT] sub menu screen by bringing the cursor to the [BACKLIGHT] and pressing [menu Set] button.
Summary of Contents for VP-ATDN12X
Page 2: ......
Page 11: ...7 77 2 3 TECHNICAL PARAMETERS VP ATDNC12X VP ATDNC12X...
