Veilux VP-ATDN12X, User Manual

Page: 48 / 81

44 / 77
¾ Can be selected in between 10 and 60 seconds.
15-2-6. Sensitivity
•
Sensitivity to detect motion on the selected detection zone.
•
Move the cursor to [SENSTIVITY] and press [LEFT] or [RIGHT] button to change the setting.
¾ Can be selected in between 0 and 100, where 50 is the normal value.
15-2-7. MD Alarm Out
•
Sets the Alarm Output upon when motion is detected.
•
Move the cursor to [MD ALARM OUT] and press [LEFT] or [RIGHT] button to change the setting.
¾ ON : [MD] gets displayed on the screen, and the Alarm Output gets activated.
¾ OFF : Motion Detection does not get alerted.
15-2-8. INITIAL SET (Same for all Sub menus)
15-2-9. PREVIOUS (Same for all Sub menus)
15-4. Privacy Mask Menu
•
In the Special Menu screen, select [PRIVACY MASK] and press
[menu Set] button to go in to the [PRIVACY MASK] menu screen.
< Figure 16. Privacy Mask Menu>
15-4-1. Masking Zone
•
Up to 8 zones can be configured.
•
Move the cursor to [MASK NUMBER] and press [LEFT] or [RIGHT] button to change the value.
¾ Configuration for each zone needs to be done separately when you select a different zone.