Veilux VP-ATDN12X, User Manual

Page: 35 / 81

31 / 77
¾ MANUAL
※
Manual controls is disabled when using WDR in Backlight option.
It can be set between 0 and 100, where 60 is considered to be normal.
6-3. Shutter
•
Changes the electrical shutter operation.
•
Move the cursor to [SHUTTER], and change the option using [LEFT] or [RIGHT] button.
•
When the setting is changed to [MANUAL], press [menu Set] button to go into the manual shutter speed change menu screen.
¾ AUTO : The camera automatically changes the shutter Speed.
¾ A- FLK : The shutter speed sets to 1/100(NTSC) or 1/120(PAL).
¾ MANUAL : The shutter speed gets set by the user manually.
¾ The value can be selected between X512 and X2(LOW) , 1/60 and 1/90000(HIGH) seconds.
※
Manual control is disabled when using WDR in the BackLight option
6-4. AGC
•
Changes the maximum value for the Automatic Gain Control.
•
Move the cursor to [AGC], and change the value using [LEFT] or [RIGHT] button.
¾ LOW Î 12 dB
¾ MIDDLE
Î 24 dB
¾ HIGH Î 32 dB
¾ MANUAL Î 0~32 dB
※
Manual control is disabled when 3D-DNR or D/N mode is set to [ON]
6-5. Sense-Up
•
Changes the number of images to be accumulated at low light
•
Move the cursor to [SENS-UP], and change the value using [LEFT] or [RIGHT] button.
¾ OFF
¾ AUTO X2 ~ X128
6-6. INITIAL SET (Same for all sub menus)
6-7. PREVIOUS (Same for all sub menus)
7. White Balance Menu
•
In the Main Menu, go into the [WHITE BALANCE] menu screen by bringing the cursor to the [WHITE BALANCE]
and pressing [menu Set] button.