3 Operation and display
48VFD700 AC Drive Getting Started Guide
3.1.3 Keypad operation
Keypad can control the operation of the drive, or monitor the status of the drive, details as
below:
LED Display
If P05.02 is set to 0
Normal display is the value of the parameter which is selected by the P05.01;
default is output frequency(value of P05.11).
VFD700 has a quick display group, and parameters of output frequency, reference
frequency, output current, output voltage, and DC bus voltage are displayed in turn.
Operation procedure is as figure 3-2:
0.00
Reference frequency
0.00
Output frequency
DC bus voltage
Output current
Output voltage
0.0
0
537
Figure 3-2 Display switchover flow
If P05.02 is set to 1
In standby mode, normal display is reference frequency. Operation procedure is as
figure 3-3:
0.0
0.00
0
537
0.00
Reference frequency Output frequency
DC bus voltage
Output current
Output voltage
Figure 3-3Display switchover flow
In running mode, normal display is output frequency. Operation procedure is as
figure 3-4:
0.00
Reference frequency
0.00
Output frequency
DC bus voltage
Output current
Output voltage
0.0
0
537
Figure 3-4Display switchover flow
NOTE:
Normal display can be the value of any parameter selected by P05.01. For
example, if setting P05.01=5.08, then the normal LED display will be motor
speed.
During the display cycle, pressing the ESC key, and the LED display will return
to the normal display content.
