3 Operation and display
VFD700 AC Drive Getting Started Guide 47
3.1.2 Key function
Table 3-2 key function
key
Function Description
Pressing the key will return to the previous level; long pressing the key will
display the value of parameter decided by P05.01. When the keypad is locked,
pressing and holding the key for 5 seconds will unlock.
Programmable key, can be functioned as Jog, Fwd.
/
Rev, and stop by setting
P05.07. Default function is Jog.
Enter next level of the keypad display.
When in keypad control mode (P00.03 or P10.07=0), pressing this key will
make the drive run.
Stop, the switch will stop the drive unless the keypad is locked totally.
Reset the drive if the keypad is not locked totally.
Are used to select parameters and edit their values. In keypad mode, they are
used to increase and decrease the speed of the motor.
Under Run/Stop mode, pressing this key will change output frequency,
reference frequency, output current, output voltage, DC bus voltage in
turn
Under editing parameter value mode, pressing this key will move the
flashing digit to the left.
NOTE: If there is a conflict in the content of parameter, pressing “PRG” key will not enter the
next parameter.
