14 Host Debugging Instruction
261 SD780 Series Servo Technical Manual
Step:
a). Click the icon
on the main interface of the host computer to enter the jog operation
interface. As shown in the left figure below, click Start, and then click forward rotation. The servo
will execute forward rotation, click Reverse, and the motor will perform reverse rotation.
14.5.2 Inertia Identification
The inertia Identification function allows the servo unit to perform automatic operation (forward and
reverse reciprocating motions), and estimates the moment of inertia of the load during operation.
Step:
a). Click [Inertia Identification]→[Next] on the host interface to enter the following interface in the
inertia identification operation process, as shown in the following figure.
