58
6 Set up with the display and adjustment module
VEGAPULS 67 • Profibus PA
36533-EN-170405
6.5 Saving the parameterisation data
We recommended writing down the adjustment data, e.g. in this op-
erating instructions manual, and archiving them afterwards. They are
thus available for multiple use or service purposes.
If the instrument is equipped with a display and adjustment module,
the data in the sensor can be saved in the display and adjustment
module. The procedure is described in menu item "
Copy device
settings
" in the menu "
Additional settings
". The data remain there
permanently even if the sensor power supply fails.
The following data or settings for adjustment of the display and ad-
justment module are saved:
•
All data of the menu "
Setup
" and "
Display
"
•
The items "
Sensor-specific units, temperature unit and linearisa-
tion
" in the menu "
Additional settings
".
•
The values of the user-programmable linearisation curve
The function can also be used to transfer settings from one instru-
ment to another instrument of the same type. If it is necessary to
exchange a sensor, the display and adjustment module is inserted
into the replacement instrument and the data are likewise written into
the sensor via the menu item "
Copy device settings
".
Backup on paper
Backup in the display and
adjustment module
