Chapter 6 Video and Audio Adjustments
VCON HD3000 User’s Guide
59
Selecting the Current Camera
Current camera selection is always available. At any time, you can select different
local video sources.
³
To select the current camera
2. Press the left or right arrow buttons to switch between the local video
sources (up to six):
3. During a conference with a party who enabled FECC, press the down
arrow key to view the remote camera selection options.
1. Press <Cam>. The Local Camera Selection menu opens. The currently
selected camera is highlighted.
During a videoconference, you can also select the current remote video
source if the remote party enabled
Far End Camera Control
(
FECC
). Using
FECC, one party may select, position and control the other party’s camera.
To enable the remote party to control your camera, see
.
Press the down
arrow to switch to
remote camera
selection (if Far
End Camera
control is
enabled).
Press the up arrow to switch back
to local camera selection.
AuxCamera 1 is selected.
HD3000 main
camera
A Composite camera
connected to a CAM
connector.
A video source
connected to the
VCR connector.
An S-Video
camera
connected to a
CAM
connector.