Chapter 12 Telephony Exchange Functions
VCON HD3000 User’s Guide
117
12.2 Call Exchange Services
If HD3000 is registered with the MXM, telephony services are available for
videoconferencing. The available services are:
•
Call Forward
•
Call Transfer
•
Inviting Additional Parties to an Ad-hoc Conference
•
Gateway Dialing for IP-to-ISDN
Call Forward
If Call Forward is activated for the HD3000, the MXM forwards calls to another
specific user if you are unable to answer. The Call Forward settings for the HD3000
may be done by both the administrator (in the MXM Administrator application) or
you. The last changes, regardless of who made them, are valid.
In HD3000, you can enable Call Forwarding by dialing a system function code.
The code may be either the factory default value or a value set by the administrator.
³
To set Call Forwarding
T
In the Manual Dialer, dial one of the following (bold values are factory
defaults):
1. To enter the “*”, press the yellow
KEYBOARD
Softkey from the
Manual Dialer screen, navigate to the “*” and select it, and then press
<OK>.
2. After dialing, a “Call Rejected” message appears. However, the request
is accepted by the MXM if the directory number is valid.
For this feature
Dial this number
Forward on no
answer
*70
(or other code number), followed by [
other
destination directory number
], and then press <Dial>.
Activate if you want to forward calls intended for you to
another specific user. The interval before transferring
the call is set by the administrator.
For example, *
70751
+<Dial> will forward calls to user
751.