Chapter 14 Troubleshooting
VCON HD3000 User’s Guide
131
If the problem you are trying to solve is not described in the Diagnostics dialog, try
to find the solution in the following sections.
14.2 Starting HD3000 .
If you have a problem with the Phone Book, you can erase it completely, by
pressing the green
ERASE PBK
SoftKey.
A confirmation message appears. Click
OK
if you are sure you want to erase
all Phone Book entries.
You can restore the factory-set defaults for the system, by pressing the blue
LOAD DEFAULTS
SoftKey.
A confirmation message appears. Click
OK
if you are sure you want to
cancel all changes made to the HD3000 options and settings and restore the
original defaults.
HD3000 restarts.
To restart the system, press the yellow
REBOOT
SoftKey.
Condition
Solution
The HD3000 starts up
slowly.
T
Verify that the LAN cable is connected by the
following methods:
— Check that the green LED underneath the
LAN connector on the rear panel is on.
— Press <Status> and then the red
DIAGNOSE
SoftKey to check the LAN
speed.
After loading, video from
the camera is visible but
the menus and address
books are not.
3. Make sure that the HD3000 is connected to
your monitor’s S-Video In connector.
-or-
If the TV only has a Composite Video In
connector, connect it to the HD3000’s VCR
Video Out connector.