Vatech Premium PAX-i3D User Manual Download Page 43

Page: 43 / 204

4. Imaging System Overview

PCT-90LH User Manual

LISH

4.5.5 Enclosed Components

The enclosed components can be disassembled and cleaned. All enclosed

components that are used to support the patient (the Bite Block, the Chinrest and the

Headrest) should be cleaned with ethanol and wiped with clean towels.

Components

Name and Function

Contact (duration)

Bite Block

Skin (≤ 24 h)

TMJ Bite

Skin (≤ 24 h)

Sinus / Edentulous Bite

Skin (≤ 24 h)

Chinrest Ass'y

(Upper part: Chinrest

Lower part: Chinrest Base)

Skin (≤ 24 h)

Sanitary vinyl covers (disposable)

for the Bite Block

Intraoral (≤ 24 h)

Headrest

Skin (≤ 24 h)

Summary of Contents for Premium PAX-i3D













































































































































































































Search results

Summary of Contents for Premium PAX-i3D

Reviews:

Related manuals for Premium PAX-i3D

Brands by name

Popular brands

Vatech Premium PAX-i3D, User Manual

Search results

Summary of Contents for Premium PAX-i3D

Reviews:

Related manuals for Premium PAX-i3D

Brands by name

Popular brands