Model 979 Series Helium Mass Spectrometer Leak Detector
DRAFT 9/15/03
1-7
1.2 Unpacking the 979
The 979 leak detector is carefully packed onto a resiliently mounted skid and enclosed by a
heavy cardboard container banded to the skid. Upon receipt, inspect the container for evi-
dence of damage in shipment. Do not discard any evidence of rough handling. When open-
ing the container, refer to the unpacking instructions located on the outside of the shipping
container. Factory packing provides for maximum protection during shipment. However,
inspect the leak detector and related items immediately. Report any damage to the carrier
without delay.
The following items are included in the shipment:
❑
Model 979 Series
Operations Manual
❑
Model 979 leak detector configured and completely assembled as ordered
❑
All necessary power cords
❑
Pump manuals (for the purchased configuration)
❑
Any optional equipment ordered
❑
Any manuals for optional equipment purchased.
1.2.1 Unpacking Instructions
To unpack the 979 leak detector and remove it from the skid:
1. Inspect the container for evidence of damage in shipment. Do not discard any evidence
of rough handling.
Report any damage to the carrier and to Vacuum Technologies Customer Service at
1-800-8VARIAN without delay.
2. Carefully remove the outer shipping container.
3. Inspect the leak detector and related items immediately for any indication of shipping
damage.
4. Carefully cut the strapping holding the leak detector on the skid.
5. Remove any loose boxes or packages and put them aside.
Keep
the original packing for re-use in the event that it is necessary to return the leak
detector to Varian Vacuum Technologies.
6. Carefully remove the front brace by removing the two lag bolts.
7. Carefully remove the plastic bag covering the leak detector.
The leak detector can now be removed from the skid.
Summary of Contents for 979 Series
Page 139: ......
