108 bright blue Installation Manual
Connecting to bright blue
There is no direct connection between the VBB-NRI G2 and
bright blue
. They need to be on the same network
and the proper IP address of the VBB-NRI G2 needs to be entered when setting up the door (see the VBB-NRI G2
IP Configuration section for details) for them to communicate. In addition, a data surge protector needs to be
installed between
bright blue
and the hub or switch. Install the supplied data surge protector (DITEK-DTK-
MRJ45C5E) or an equivalent UL Listed unit. Power is supplied independently from a power supply connecting to
P1 on the VBB-NRI G2.
Data Communication between bright blue and VBB-NRI G2
bright blue
VBB-NRI G2
Power Supply
Ethernet To Network
Ethernet to Network
1 VIN + (Power)
+ (Power)
1 VIN - (Ground)
- (Ground)
