174 bright blue Installation Manual
•
Click the
“+” / “Add Device” in the ENAGE app to find the Gateway.
•
Select the Gateway. The Gateway LED will flash blue.
•
Click “Yes”.
•
Configure Device will open
•
Name the Gateway and click Save / Next
•
The next screen is used to configure the RS-485 address of the Gateway and the settings for the
Low Door address & High Door address (see addressing section above).
•
Set the Gateway, Low Door and High Door Addresses
•
Clic
k “Save” – Commissioning is completed
•
Click “Disconnect”
•
The Gateway will now be displayed in the Connect to Device / Site screen
If the GWE
– Gateway is not successfully commissioned and defined via the Android or iOS mobile device, the
Gateway will have to be reverted to the Schlage Factory Default settings prior to a 2
nd
attempt to commission.
See the Schlage GWE
– Gateway Installation Instruction Guide for Factory Default Reset instructions.