16.
WINDOW REFITTING & CHECKING
1.
Place the window centrally against the engine unit and resting on the support at bottom front of the engine.
2.
Pull the clamping bars forward and rotate inwards to secure the top of the window. See figure 82
3.
Fit the two spring loaded bolts through the bottom of the window and tighten to secure the bottom of the window. See
figure 82.
4.
Pull the top of the window forward and release to check that the window opens slightly and returns in the event of a
delayed ignition explosion. See figure 83.
Figure 82
5.
Similarly check the bottom of the window by pulling it forward and releasing. See
figure 84.
6.
Apply light hand pressure against the window frame sides to bed in the window seal.
Figure 83
Figure 84
Manufactured by Miles Industries Ltd., British Columbia, Canada
40
