Manufactured by Miles Industries Ltd., British Columbia, Canada
3
2.
OPTIONS
Heater engine unit #530EAN is used with all installations.
2.1.
Appliance styles
President FS
Free standing cast iron stove.
(See
figure
1),
Black textured -
Kit #531CSB.
Black
enameled
–
Kit #532ESB.
Green
enameled
–
Kit #533ESG.
President ZC
For zero clearance inset in framed
recess.
Cast iron front. (See figure 2)
Black textured –
Kit #536CFB.
Black
enameled
–
Kit #537EFB.
Green
enameled
–
Kit #538EFG.
One of the above kits must be used with each
installation.
2.2.
Additional optional features
Remote control unit
Hand operated control for
flame & heat adjustment. It
may be fitted before the
fireplace is installed or
retrofitted at a later date -
Kit #553RCK.
Circulating fan
Having variable speed and
temperature control, it is
designed to boost the natural
convection process through the
appliance. It may be fitted
before the fireplace is installed
or retrofitted at a later date –
Kit #555CFK
.
Wall switch
Optional kit that can replace
the flame and heat adjustment
switch fitted as standard to the
appliance.
Kit #557WSK
2.3.
LP Gas
LPG Conversion kit
Burner & injector kit for
conversion from natural gas to
propane –
Kit #554LPK
.
2.4.
Venting options
2.4.1.
Direct vent installations
One or more of the accessories listed below must be used
for each installation. See the “Location” section of this
manual.
Kit#
551DVK
Valor terminal kit for non-combustible
wall thickness up to 26” (66cm)
(Combustible maximum 14” (36cm))
558FLK
Through the wall Dura-vent pipe
insulation kit
817VAK
Adapter for Dura-vent pipes
984
Dura-vent DV GS horizontal square
terminal cap
942
Dura-vent DV GS wall thimble kit
945B
45° Dura-vent DV GS elbow
990B
90° Dura-vent DV GS elbow
908B
6” Dura-vent DV GS pipe length
907B
9” Dura-vent DV GS pipe length
906B
12” Dura-vent DV GS pipe length
904B
24” Dura-vent DV GS pipe length
903B
36” Dura-vent DV GS pipe length
902B
48” Dura-vent DV GS pipe length
911B Adjustable
11”-14
5
/
8
” Dura-vent DV GS
pipe length
981
Dura-vent DV GS snorkel termination
unit – 36” rise
982
Dura-vent DV GS snorkel termination
unit – 14” rise
991
Dura-vent DV GS high wind vertical
termination cap
940 Dura-vent
DV
GS
round ceiling support
941
Dura-vent DV GS cathedral ceiling
support box
963
Dura-vent DV GS ceiling firestop
943
Dura-vent DV GS adjustable roof
flashing. Roof pitch 0/12 – 6/12
943S
Dura-vent DV GS steep roof flashing.
Roof pitch 7/12 – 12/12
953
Dura-vent DV GS storm collar
988
Dura-vent DV GS wall strap
923GCL
Dura-vent DV GS co-axial to co-linear
appliance connector
923GK
Dura-vent DV GS co-linear termination
kit
984
Dura-vent DV GS square terminal cap
2280
Dura-vent DV GS co-linear flex chimney
liner 35ft. length.
835TG Terminal
Guard
2.4.2.
B-vent installations – For President FS
only
Kit #552BVK
converts this appliance from a direct vent
fireplace heater to a gravity vent fireplace heater for use
with a 4” “B” type vent. A full installation and operating
manual is supplied with the kit.
