8.9.
Attaching top air deflector
Fit the top air deflector under the top panel of
the appliance case. Secure with two thread
forming screws. See figure 49.
Figure 49
8.10.
Attaching Outer Surround - ZC Models Only
Manufactured by Miles Industries Ltd., British Columbia, Canada
27
1.
Locate the surround over the appliance.
2. Secure the surround to the sides of the appliance case with four
thread cutting screws supplied. Screw from outside through the
access holes in the surround – See figure 50.
3.
The outer surround has alternative locating tabs allowing its front
face to be positioned
1
/
2
", ¾” or 1” in front of the framing
studding. This enables a variety of wall finish thicknesses to be
used which will be level with the front surface of the surround.
The surround is supplied with all the tabs flat.
Check the wall finish requirements with the home owner. Bend
the appropriate tabs – See figure 21.
Figure 50
8.11.
