© Valco Cincinnati, Inc.| 411 Circle Freeway Dr.| Cincinnati, OH 45246 | USA
www.valcomelton.com | TEL: (1) 513-874-6550 | FAX: (1) 513-874-3612
Doc. IS0xxx
Rev.04 | Date: August 25, 2021
MCP-8I Quick Start Guide
Pattern Tolerance Examples and Explanations
Glue Line Start Early & Late Tolerances
Figure 34: Glue Line Start Tolerances Navigation
The
Glue Line – Early Start
is the maximum allowed distance the pattern is allowed to start
early and still be considered
Good and within tolerance
. The
Glue Line – Late Start
is the
maximum allowed distance the pattern is allowed to start late and still be considered
Good and
within tolerance
. Anything outside of the +/- Tolerance will trigger a failure.
As shown in Figure 27:
·
Zone 1 - is the Pattern Start location that will cause a failure because the pattern
Started
Early Outside of the Tolerance window
.
·
Zone 2 - is the Pattern Start location that will cause a pass because the pattern
Started
Early within of the Tolerance window
.
·
Zone 3 - is the Pattern Start location that will cause a pass because the pattern
Started
Late within of the Tolerance window
.
·
Zone 4 - is the Pattern Start location that will cause a failure because the pattern
Started
Late Outside of the Tolerance window
.
Figure 35: Start Tolerances Example
