8.5 Troubleshooting
Problem
Possible Cause
Solution
Functionalities are not available
in the Insight PC software.
The Insight PC software is in
Basic mode
. Certain
functionalities are only
available in
Advanced mode
.
Change the user mode from
Basic mode
to
Advanced
mode
in the
Settings
menu of
the Insight PC software.
Measurement performance
affected after calibration.
Probe has not been switched
from calibration mode to
normal operating mode in the
Insight PC software.
Open the
Calibrate
menu in the
Insight PC software. Exit the
menu with the
Close
selection,
and ensure that you confirm
closing the calibration mode
when exiting with the
Yes
selection.
Analog output appears
incorrect.
The analog output channel
Adjustment mode
has not
been switched off after
adjustment.
Open the analog output
adjustment menu in the Insight
PC software or the Indigo80
handheld indicator and switch
the adjustment mode off.
Note that each of the 3 analog
outputs has its own
configuration menu.
Transmitter display shows a
warning saying that outputs are
configured for a different
probe.
An analog output configuration
for another type of probe
already exists in the
transmitter, so the settings
cannot be received
automatically from the type of
probe you are connecting.
Configure the analog output
settings for the new probe, or
clear the analog output
configuration of the transmitter
to enable automatic receiving
of the settings.
You can do these tasks using
either the Insight PC software
or the Indigo80 handheld
indicator.
The push button for navigating
the transmitter display does
not function.
The push button has been
disabled, so you can currently
change the transmitter display
view only with the Insight PC
software or Indigo80 handheld
indicator.
Enable the push button using
the Insight PC software or the
Indigo80 handheld indicator.
8.6 Display messages
The following table lists the display messages that the transmitter uses to inform you about its state.
Chapter 8 – Maintenance and troubleshooting
59
Summary of Contents for Indigo300
Page 1: ...M212849EN A User Guide Transmitter for Vaisala Indigo compatible probes Indigo300...
Page 70: ......
Page 71: ......
Page 72: ...www vaisala com...