background image

9. Technical data

9.1 Specifications

Table 9 Indigo-compatible probes

Measurement type

Probe models

Humidity and temperature

HMP1, HMP3, HMP4, HMP5, HMP7, HMP8, HMP9

Temperature

TMP1

Dew point

DMP5, DMP6, DMP7, DMP8

Carbon dioxide

GMP251, GMP252

Vaporized hydrogen peroxide

HPP271, HPP272

Moisture in oil

MMP8

Table 10 Indigo300 operating environment

Property

Description/Value

Operating temperature

−20 … +60 °C (−4 …+140 °F)

Storage temperature

−30 … +70 °C (−22 …+158 °F)

Operating humidity

0 … 100 %RH

Maximum operating altitude

5000 m (approx. 16 400 ft)

IP rating

IP65: Dust-tight. Protected from powerful water
jets from any direction.

Note:

 Protect the device from direct sunlight.

Table 11 Indigo300 inputs and outputs

Property

Description/Value

Power supply input

15 … 30 V DC 

1)

24 V AC ±10 % 50/60 Hz

Fuse size for power supply

2.5 A

Transmitter service port connection

• Connection to Insight with USB2 and cable

26219

2)

• Connection to Indigo80 with cable 262195

Analog outputs

Current or voltage

Number of analog outputs

3

Indigo300 User Guide

M212849EN-A

62

Summary of Contents for Indigo300









































































Reviews: