Vaisala Indigo300, User Manual

Page: 11 / 72

2.3 Transmitter display
Figure 3 Indigo300 display, numerical mode
1 Display view navigation icons
2 Message field for notifications, warnings and errors
3 Active connection to Insight PC software or Indigo80 handheld indicator
You can configure the transmitter display to show 1 to 3 measurement parameters in numeric
and graph format. Notifications, warnings and errors are shown on a message row on the top
part of the display.
The displayed parameters, display brightness, and display mode (numeric or graph) can be
configured with the Insight PC software or Indigo80 handheld indicator.
By default, the display shows the output parameters configured for the transmitter's analog
outputs. If no output parameters have been configured for the analog outputs, the display
shows the preferred parameters of the connected probe.
Switching between display views and turning display off and on
To switch between different display views, push the left button on the front cover once.
To turn the display off and on, keep the left button pressed down for a few seconds. You can
also turn the display off with the Insight PC software or Indigo80 handheld indicator. When the
display is off, the LED status indicator lights up to inform about the device status.
Chapter 2 – Product overview
11