Installation instructions for geoTHERM exclusive VWS 0020051614_00
22
Fig. 4.11 Transporting the complete unit (barrow)
a
Caution!
Risk of damage!
Find out the weight of the heat pump
from the Technical Data and make sure
that the transportation method you se-
lect is appropriately constructed.
When using a barrow, take note:
• Only use the barrow on the
rear
side of the heat
pump, as the weight distribution is then the most fa-
vourable.
• Fasten the heat pump with a restraining strap.
• Use a ramp when pushing the barrow from the pallet,
e.g. a batten and a sturdy board.
4.10.2 Transport of the respective modules of the
heat pump
Separating modules
When necessary, you can separate the domestic hot
water cylinder module from the heat pump module and
then convey both separately. This is recommended, for
example, in narrow stairs.
1
3
2
Fig. 4.12 Separating domestic hot water cylinder and heat
pump modules
4 Assembly and installation
Summary of Contents for geoTHERM exclusive
Page 91: ......
Page 92: ...0020051614_00 GB 102008...
