V-TEK Versacount II+, User Manual, Page: 7 / 76

Intended Use 61673513.fm iii
Intended Use
The intended use of the Versacount II+ Taped Components Counter is to count taped reels of
individually sealed SMD or Radial/Axial components. Use of this equipment in any other way is
not recommended.
Operating Environment
The Versacount II+ is designed to be operated in a temperature controlled, light, industrial set-
ting. The machine should be installed on a flat, dry, stable surface in a well lit area (ambient light-
ing of 200 to 300 Lux (Lumens/m2).
The recommended climate is between 5 - 90% non-condensing humidity with a room tempera-
ture between 0 - 50 degrees Celsius.
Note : Although all of the components used on the machine will withstand the temperature
range of 0 to 60 degrees Celsius, such temperature may decrease the life of some of the
components.
The intended electrical environment is Pollution Degree 2 and Over Voltage Category II.
Misuse
The user is protected from moving parts and exposure to objects being ejected under pressure
by metal enclosures. The Versacount II+ should never be operated with these enclosures
removed.