DE35-ST Operating Instructions
D292469I
41
ii.
Press the
NO
key at this time will take you to
QUIT MENU
for the
OUTPUT SELECT
menu. Pressing the
YES
key again will take you
back to
QUIT MENU
.
i.
Press the
Output Sizes
key.
Select/Enter Waffle Pack part number.
i.
Move the cursor to
PATTERN NUMBER
and press the
YES
key.
The first digit of the 6-digit P/N will be flashing.
ii.
Using the Keyboard, enter the Waffle Pack number you are going
to use and press the
YES
key. For example, if the waffle pack
number is H20-55-24 then enter 000055-24. The H20 indicates a
2” waffle pack.
iii.
The display will say either
Catalog
or
New Pattern #
. If it is a
catalog pattern number the dimensions will be automatically
loaded. If it says
NEW
, go to the
Programming Your Own Waffle
Pack
chapter before proceeding.
Note:
There are 250 programmed waffle packs in the system.
iv.
Press the
NO
key to return to
QUIT MENU
, press the
YES
key to
quit.
4.
Install Waffle Packs.
To install the waffle packs onto the output stage, release the clamp pins by
pulling on the fluted edges of the clamp plates at each corner of the output
tooling plate. The waffle packs should be installed so that the corner bevel is
towards the front and facing to the left hand side of the machine. This insures
the X and Y pitch orientation is correctly aligned If the waffle pack cavities are
rectangular.
Summary of Contents for Royce DE35-ST
