DE35-ST Operating Instructions
D292469I
123
Remove piston:
a.
Piston style eject heads:
i.
Carefully remove the
springs and set aside. Slide
the piston from the eject
head body pressing up
from the bottom of the
piston (if present, remove
any locking screws first)
b.
Hex style eject heads:
i.
Carefully hold the upper part of
the piston, use a ¼” wrench to
loosen and remove the hex
screw at the bottom of the
piston.
ii.
Remove spring, o-ring and slide
the piston out of the flange.
c.
Plunger style eject heads:
i.
Carefully remove piston block from eject head body,
take care not to lose any springs.
ii.
To check the internal o-ring, remove the
locking set screw (0.035” hex key) from
the slot in the threads to release the
plunger.
Piston
Plunger O-ring
[2091]
(Internal)
Piston
Piston
O-ring
[2350]
Body o-ring [2441]
Summary of Contents for Royce DE35-ST
