![background image](http://html1.mh-extra.com/html/v-tek/royce-de35-st/royce-de35-st_user-manual_3084738027.webp)
26
D292469I
Basic Operation
Royce Technical Video Operation
Shapes:
Shapes are used by the operator to target die onscreen prior to beginning a pick and
place cycle. Shapes can also be used on the screen to show the position of the Pick Up
Tip and/or Eject Needles to aid with system alignment.
Creating Shapes:
1.
On the Toolbar, click on the icon for the desired shape.
2.
Move the cursor over to the live video image. Click and drag until the
shape is the desired size.
3.
Repeat until all desired shapes have been created.
Editing Shapes:
1.
Click on the shape in the live video image. This makes the shape “active” and small
handle boxes will appear to allow editing.
•
To resize the shape, click and drag any of the Handle Boxes.
•
To move the shape, click on the shape (not on a handle box) and drag the shape
to the desired location.
•
To change the color of the shape’s outline, click on the
Pen Icon
.
This will open the Color Selection Box (see Figure 4). Select the
desired color and click
OK
.
•
To change the shape’s fill color, click on the
Color Grid Icon
.
Select the desired color from the color selection box and click
OK
.
Figure 4 - Color Selection Box
Summary of Contents for Royce DE35-ST
