V-TEK Royce DE35-ST, User Manual

Page: 72 / 146

DE35-ST Operating Instructions
D292469I 71
X Pockets
This is the number of columns pockets in a left to right direction. If you enter a
number too large for the size pack you are using the system will beep three
times and display OUTPUT DIMENSIONS INVALID .
Y Pockets
This is the number of positions from front to back. . If you enter a number too
large for the size pack you are using the system will beep three times and display
OUTPUT DIMENSIONS INVALID .
NOTE: When entering your own waffle pack or GEL pak configuration the option
SAVE CONFIGURATION ? will display in the menu. You do not have to save the
configuration, you can use your own waffle pack configuration temporarily and
are not obliged to save it permanently, if you have no long term need.
To save the configuration in long-term memory, press the YES key at the SAVE
CONFIGURATION?
prompt in the menu. The system will then attempt to save
your chosen configuration in nonvolatile memory (long term storage space). It
will search for a waffle pack part number of 000000-00 as a vacant "pigeonhole"
in memory to save the new configuration in for future use. Once the
configuration is saved, it can be selected from the menu just as if it had been one
of the standard catalog waffle pack part numbers.
NOTE:
Do not assign 000000-00 as a valid waffle pack part number. This number
is reserved for saving custom configurations to long term memory as described
above.
The limit for custom part numbers is 75. Once 75 part numbers have been
programmed, no more may be saved. The message
MEMORY FULL
will show in
the display and a warning beep will sound.