Utax P-C4580DN User Manual Download Page 48

Page: 48 / 360

Preparation before Use

2-24

Be sure that the paper length and width guides rest securely against
the paper. If there is a gap, readjust the guides to fit the paper.

Press the (Paper Width Guide) Lock to lock.

Insert the indication on the sheet so as to match the size and type of
paper to be placed. (The indication is printed on both sides of the
sheet.)

Gently push the cassette back in.

Select the media type (plain, recycled, etc.) loaded in the cassette.
(Refer to

Specifying Paper Size and Media Type for the Cassettes on

page 2-30

Note

If the machine will not be used for a prolonged period,

protect all paper from humidity by removing it from the
cassettes and sealing it in the paper storage bag.

Summary of Contents for P-C4580DN









































































































































































































































































































































































Search results

Summary of Contents for P-C4580DN

Reviews:

Brands by name

Popular brands

Utax P-C4580DN, User Manual

Search results

Summary of Contents for P-C4580DN

Reviews:

Brands by name

Popular brands