Utax P-C4580DN User Manual Download Page 169

Page: 169 / 360

6-45

Operation Panel

RA (Stateless) (RA (Stateless) setting)

Select whether or not to use RA (Stateless). The RA (Stateless) settings are available when selecting

for TCP/IP (IPv6).

The default setting is

IMPORTANT

After changing the setting, restart the network, or turn the machine OFF and then ON. For detailed

information on restarting the network, refer to

Restart Network (Restarting the network card) on page 6-47

In the IPv6 Setting menu, press





to select

RA(Stateless)

Press

[OK]

. The

RA(Stateless)

screen appears.

Press





to select whether RA (Stateless) is enabled.

Press

[OK]

. The RA (Stateless) setting is set and the IPv6 Setting

menu reappears.

DHCPv6 (DHCPv6 setting)

Select whether or not to use the DHCP (IPv6) server. The DHCP (IPv6) Settings are available when selecting

for TCP/

IP (IPv6). The default setting is

IMPORTANT

After changing the setting, restart the network, or turn the machine OFF and then ON. For detailed

information on restarting the network, refer to

Restart Network (Restarting the network card) on page 6-47

In the IPv6 Setting menu, press





to select

DHCPv6

Press

[OK]

. The

DHCPv6

screen appears.

Press





to select whether DHCPv6 is enabled.

Press

[OK]

. The DHCPv6 setting is set and the IPv6 Setting menu

reappears.

RA(Stateless):

Off

********************-

*On

DHCPv6:

Off

********************-

*On

Summary of Contents for P-C4580DN









































































































































































































































































































































































Search results

Summary of Contents for P-C4580DN

Reviews:

Brands by name

Popular brands

Utax P-C4580DN, User Manual

Search results

Summary of Contents for P-C4580DN

Reviews:

Brands by name

Popular brands