Utax P-C4580DN, User Manual

Page: 133 / 360

6-9
Operation Panel
Print Function Settings
When printing, the print settings can be changed.
Options available in Print Function Settings are as follows:
• Paper Output (Output location selection)...6-9
• Collate (Collate Setting)...6-9
• Offset (Offset Setting)...6-10
• Duplex (Setting the duplex printing)...6-10
• Eco Print (Selecting the EcoPrint mode)...6-11
• File Name Entry (entering a file name)...6-11
• JobFinish Notice (Setting for notification when jobs are finished.)...6-12
• Encrypted PDF (PDF password entry)...6-13
• TIFF/JPEG Size (Adjusting the TIFF/JPEG file print out size)...6-13
• XPS FitTo Page (Adjusting the XPS file print out size)...6-14
Paper Output (Output location selection)
Select the output location. For details, refer to Paper Output (Selecting the Paper Output Location) on page 6-31 .
1
In the Copies menu or the Paper Selection menu, press
[Function]
( [Right Select] ). The
Function
menu appears.
2
Press

or

to select
Paper Output
.
3
Press [OK] . The
Paper Output
menu appears showing the
available output locations.
4
Press

or

to select the desired output location.
5
Press [OK] . The selected output location is stored and the
Function
menu reappears.
Collate (Collate Setting)
Select the collate setting.
1
In the Copies menu or the Paper Selection menu, press
[Function]
( [Right Select] ). The
Function
menu appears.
2
Press

or

to select
Collate
.
Note The screen varies depending on the installed options.
Function:
a b
********************-
2
Collate
3
Offset
1
Paper Output
Paper Output:
a b
********************-
2
Tray A
3
Tray B
1
*Job Separator
Note
The screen shown appears when a 4,000-sheet Finisher is
installed.
Function:
a b
********************-
2
Collate
3
Offset
1
Paper Output