Utax LP 3036, Instruction Handbook Manual

Page: 9 / 113

8
Installation Precautions
Environment
CAUTION
• Avoid placing the printer on or in locations which are
unstable or not level. Such locations may cause the
printer to fall down or fall over. This type of situation
presents a danger of personal injury or damage to the
printer. .........................................................................
• Avoid locations with humidity or dust and dirt. If dust or
dirt becomes attached to the power plug, clean the
plug to avoid the danger of fire or electrical shock. .....
• Avoid locations near radiators, heaters, or other heat
sources, or locations near flammable items, to avoid
the danger of fire. ........................................................
• To keep the printer cool and facilitate changing of
parts and maintenance, allow access space as shown
below. Leave adequate space, especially around the
left cover, to allow air to be properly ventilated out of
the printer. ...................................................................
• Always use the caster stoppers to stabilize the printer
once it is in place to keep it from moving and/or falling
over and causing injury. ..............................................
Other Precautions
• Adverse environmental conditions may affect the safe
operation and performance of the printer. Install in an
air-conditioned room (recommended room tempera-
ture: around 20 °C, humidity: around 65 % RH) and
avoid the following locations when selecting a site for
the printer.
• Avoid locations near a window or with exposure to di-
rect sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temperature fluctuations.
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ventilated locations.
Power Supply/Grounding the Printer
WARNING
• DO NOT use a power supply with a voltage other than
that specified. Avoid multiple connections in the same
outlet. These types of situations present a danger of
fire or electrical shock. ................................................
• Plug the power cord securely into the outlet. If metallic
objects come in contact with the prongs on the plug, it
may cause a fire or electric shock. .............................
• Always connect the printer to an outlet with a ground
connection to avoid the danger of fire or electrical
shock in case of an electric short. If an earth connec-
tion is not possible, contact your service representa-
tive. .............................................................................
Other Precautions
• Connect the power plug to the closest outlet possible
to the printer.
Handling of Plastic Bags
WARNING
• Keep the plastic bags that are used with the printer
away from children. The plastic may cling to their nose
and mouth causing suffocation. ..................................
Front:
>
=
100 cm (39-
3
/
8
")
Rear:
>
=
10 cm (3-
15
/
16
")
Left:
>
=
60 cm (23-
5
/
8
")
Right:
>
=
70 cm
(27-
9
/
16
")