Utax LP 3036, Instruction Handbook Manual

Page: 39 / 113

Chapter 3 Using the Operator Panel
3-23
Press the
3
or
4
key repeatedly until the desired alter-
native emulation appears.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready
.
Auto Printing of KPDL Error
The printer can be set to print error data during KPDL emulation.
If this is set to
On
, error data will be printed only when trouble oc-
curs during printing. The factory default setting is
Off
.
Press the MENU key.
Press the
3
or
4
key repeatedly until
Emulation >
appears.
Press the ENTER key. A blinking question mark (
?
) ap-
pears.
Select
KPDL
or
KPDL (AUTO)
using the
3
or
4
key.
Press the ENTER key.
Press the
2
key. The message display changes to that
shown below. If >Print KPDL Errs is displayed
when the KPDL (AUTO) emulation is selected, press
the
3 or 4 key to change it.
Press the ENTER key. A blinking question mark (
?
) ap-
pears.
Select
On
using the
3
or
4
key.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready
.
KC-GL Pen Width
The KC-GL emulation mode enables you to set the pen widths
in dots, for pen numbers 1 to 8, and the KC-GL page size.
Press the MENU key.
Press the
3
or
4
key repeatedly until
Emulation
ap-
pears on the message display.
If the current emulation is other than KC-GL, press the
ENTER key. A blinking question mark ( ? ) appears.
Press the 3 or 4 key repeatedly until
KC-GL
appears.
Press the ENTER key.
Press the
2
key to move to the
>KC-GL Pen Width
submenu.
Press the
2
key.
Press the
3
or
4
key repeatedly until the desired pen
number of
1
to
8
appears.
When the desired pen number is displayed, press the
ENTER key.
Emulation >
PCL 6
Emulation
?PCL 6
Emulation
?KPDL
>Print KPDL Errs
Off
>Print KPDL Errs
?Off
>Print KPDL Errs
?On
8
9
10
1
2
3
4
5
6
7
8
Emulation >
PCL 6
Emulation
?PCL 6
Emulation
?KC-GL
Emulation >
KC-GL
>KC-GL >
Pen Width
>>Pen(1) Width
01 dot(s)
9
10
1
2
3
4
5
6
7
8
9