9
US Water UV Light Introduction
USWATER 6.0 Operational Screens
On systems that have the UV module installed (and on all USWATER6.0 systems), the default screen
shows the
% UV Intensity
. At any point during operation the user is able to scroll through the
% UV
Intensity
,
Lamp life remaining
and
QR Code
s c r een s b y s i m p l y p r es s i n g t h e bu tt o n lo c at ed
on the
front of the controller.
USWATER 6.0 % UV Intensity
If your system is equipped with a UV sensor the % UV Output screens will indicate the level of UV intensity
that is being detected within the reactor by the sensor. This will always be visible on the Home Screen of
the controller. Things that can affect the % UV Output are poor water quality, scaling of the quartz
sleeve and/or sensor, lamp failure, expired lamp life and sensor failure. The following screens show the
% UV Output dropping on a monitored system.
