manualshive.com logo in svg

US Water Systems 385-GWU-1000, Owner'S Manual

The US Water Systems 385-GWU-1000 is a top-of-the-line water filtration system. Ensure optimal performance and proper maintenance by referring to the comprehensive Owner's Manual. Download it for free from our website manualshive.com and access all the necessary instructions and guidelines to get the most out of this exceptional product.

Share
Download
background image

 

 

 

28 

3.  Be sure the weighted strainer on the 1/4” tubing until it can be seen in the slots in the 

weighted strainer.  Then  drop the strainer in the tank and push the 1/4” tubing through the 
hole in the tank until the weighted strainer is about 1” off the bottom of the tank. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
4.  Now attach the other end of the 1/4” tubing to the pump on the injection panel.  Put the nut 

over the tubing and then the sleeve.  Push the tubing in the pump fitting and tighten the nut 
hand tight.  The connection on the pump should be held with one hand while the nut is tight-
ened with the other hand.  Hand tight should be sufficient.  The inlet on the pump is the port 
closest to the pump mounting bracket. 

Injection Panel Chemical Solution Tank Installation Instructions 

Installation, Operation and Maintenance Manual 

 

385-GWU-1000, 385-GWU-1500, 385-GWU-2000 

Summary of Contents for 385-GWU-1000






















































Reviews:

No comments

Related manuals for 385-GWU-1000

GE SmartWater GX1S01C Features preview
SmartWater GX1S01C
Brand: GE Pages: 2
GE GXSL55F Owner'S Manual preview
GXSL55F
Brand: GE Pages: 20
GE GNPR40L Owner'S Manual And Installation Instructions preview
GNPR40L
Brand: GE Pages: 36
Hamma Misceo 3 Instructions Manual preview
Misceo 3
Brand: Hamma Pages: 60
Xylem Bell & Gossett ecocirc XL Series Manual preview
Bell & Gossett ecocirc XL Series
Brand: Xylem Pages: 62
Amtra A3076675 Manual preview
A3076675
Brand: Amtra Pages: 50
DAB evoplus Instruction For Installation And Maintenance preview
evoplus
Brand: DAB Pages: 228
BWT PERMAQ PRO 1810 Installation And Operating Instruction preview
PERMAQ PRO 1810
Brand: BWT Pages: 32
Idea Group Aqua NYU-SENSE Assembly Instructions Manual preview
Aqua NYU-SENSE
Brand: Idea Group Pages: 11
BSVILLAGE Azuro 2m3/h Installation, Assembly And Operation Manual preview
Azuro 2m3/h
Brand: BSVILLAGE Pages: 32
BWT Aqua Flex T 1000 Manual preview
Aqua Flex T 1000
Brand: BWT Pages: 28
HydroLogic Hydroid User Manual preview
Hydroid
Brand: HydroLogic Pages: 38
Baker Mooney 30 Instruction Manual preview
Mooney 30
Brand: Baker Pages: 8
Frizzlife SP99 Owner'S Manual preview
SP99
Brand: Frizzlife Pages: 9
Wavin-Labko EuroPEK Filter Instructions For Installation, Operation And Maintenance preview
EuroPEK Filter
Brand: Wavin-Labko Pages: 11
HAEGERTEC BRIGHT WATERS User Instructions preview
BRIGHT WATERS
Brand: HAEGERTEC Pages: 24
Everpure Dual Series Housing CGS-12 10 Specification Sheet preview
Dual Series Housing CGS-12 10
Brand: Everpure Pages: 2
Scottoiler eSystem Installation Manual preview
eSystem
Brand: Scottoiler Pages: 1

Brands by name

Popular brands

Load more brands