US Robotics 3CP3468 User Manual Download Page 76 | Manualshive

Page: 76 / 105

background image

signal. How do I set my ISDN TA to drop one of the B-
channels on the data transmission and allow the call to
come through?

Open ControlCenter. Then click the Configuration Manager icon.

When the “Basic Configuration” screen appears, click the Dynamic
Voice Override drop-down menu. Then select Incoming and
Outgoing Calls.

If this does not work, have the person try calling the other phone
number for your ISDN line. Dynamic Voice Override may work on
only one of your phone numbers, depending upon the type of ISDN
service that you use.

When I try to place a call to my Internet Service Provider, I
am unable to make a connection.

Make sure your ISDN TA is properly configured for the ISDN
line by running ControlCenter. If there is a problem with the way
the SPIDs and telephone numbers for your ISDN line are set up,
ControlCenter’s SPID Wizard will reconfigure your ISDN TA.

Open ControlCenter and click the Configuration Manager icon.
When the “Basic Configuration” screen appears, verify that
“Internet Access (PPP)” is selected in the “Outgoing Calls” drop-
down menu. This is the most common connection protocol used
by Internet Service Providers.

Verify that the CD light on the front of your ISDN TA illuminates
when you place a call to your Internet Service Provider. If the CD
light does not come on after you dial, open ControlCenter and
click the Configuration Manager icon. When the “Basic
Configuration” screen appears, click 56K next to “B-channel
Rate.”

You may need to use a special character in the number you dial (if
you are using AO/DI or MultiLink PPP, for example). For more
information, see the chapter

“Dialing, Storing Phone Numbers,”

and Logging Calls.”

When I place a call to my server, the CD light on the front of
the ISDN TA illuminates. However, I cannot authenticate to
the remote server.

Open ControlCenter. Then click the Configuration Manager icon.

Click the Advanced Configuration button, followed by the Data tab.
Then click the PPP Settings button.

When the “PPP Settings” screen appears, click the PPP Mode drop-
down menu. Then click Transparent Async/Sync PPP to select it.

«
...
74
75
76
77
78
...
»

Summary of Contents for 3CP3468










































































































Reviews:

No comments

Related manuals for 3CP3468

Brand: StarTech.com Pages: 2

Brand: UNICOM Pages: 7

Versa WiFi USB Adapter 3

Brand: C. Crane Pages: 30

Brand: Zonet Pages: 62

Brand: cable matters Pages: 8

Brand: TRENDnet Pages: 15

USB-IrDA Adapter

Brand: Hama Pages: 13

USB Power Adapter A04-PAU02

Brand: Atlantis Land Pages: 2

NetBlaster ZX345

Brand: ZNYX Pages: 12

Brand: Keyspan Pages: 40

Brand: Arion Pages: 18

LINKSYS WMP300N

Brand: Linksys Pages: 71

PowerLife 3LR12PBXC

Brand: Philips Pages: 2

Brand: Rocstor Pages: 2

Brand: Rocstor Pages: 2

Neomounts AWL75-450WH

Brand: NewStar Pages: 4

Brand: Nikon Pages: 2

Brand: Dynalink Pages: 128

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands