Manufacturer’s Declaration of Conformity
3COM Corporation
3800 Golf Road
Rolling Meadows, IL 60008
U.S.A.
Telephone: 847 262 5000
declares that the product 3COM US Robotics ISDN Terminal Adapter conforms to the FCC’s
specifications:
Part 15, Subpart B, Class B
Operation is subject to the following two conditions:
(1) this device may not cause harmful electromagnetic interference, and
(2) this device must accept any interference received including interference that may cause
undesired operations.
FCC Notice: Radio and Television Interference
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
The user may find the following information prepared by the Federal Communications
Commission helpful: The CIB Interference Handbook and The CIB Telephone Interference
Bulletin.
These documents are available on the Internet through the FCC Compliance and Interference
Bureau Home Page at http://www.fcc.gov/cib listed under documents. Select CIB Interference
Handbook or CIB Telephone Interference Bulletin.
CAUTION
: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE
THIS EQUIPMENT
FCC Part 68 Statement
3COM Corporation
Model No: 3C04xx3468xx
Made in: Ireland
This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a
label that contains, among other information, the FCC 68 registration number for this equipment.
If requested, this information must be provided to the telephone company.
In addition, the telephone company may request that the following information be provided:
Type of interface:
Basic Rate ISDN
Service Order Code ( SOC ): 6.0Y
Facility Interface Code:
02IS5
USOC:
RJ-45
An FCC compliant, 26 AWG telephone cord with a modular plug is provided with this equipment.
This device connects to the telephone network via an RJ-45 ISDN plug and jack. The plug and
jack also comply with FCC part 68 rules. Be sure that the telephone line you are connecting the
modem to is a standard ISDN line and not a digital ( PBX ), party, or coin telephone line.
If this device causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required until the problem is resolved.
But, if advance notice is not practical, the telephone company will notify the customer as soon as
possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is
necessary.
The telephone company may make changes in its facilities, equipment, operations, or
procedures that could effect the operation of the equipment. If this happens, the telephone
