Figure 6-2 ControlCenter “Advanced Voice Settings” screen
Advanced Voice Configuration
Several other features for the Analog Device Ports can be set from the
Voice tab using ControlCenter’s advanced configuration tools.
To get to ControlCenter’s Voice tab:
1
Open ControlCenter.
2
From the list of devices that appears on the left of the
ControlCenter screen, select your ISDN TA by clicking it.
3
Click the Modify button. When the screen changes, click the
Advanced Configuration button.
4
Click the Voice tab.
The screen shown in Figure 6-1 appears. It lists a series of
parameters for each of your ISDN TA’s Analog Device Ports.
The following settings can be changed from this screen:
Telephone Number Assignment – Use the drop-down menu
under each Analog Device Port heading to set the telephone
number for that port.
You can also disable incoming calls to the port by selecting
Disable Incoming Calls.
Caller ID – See the “Enabling Voice Features in
ControlCenter” section of this chapter for information about
this setting.
