Figure 11-1 ATI12 information screen
Switch Protocol
The switch protocol is set using AT*W=n. The switch type is supplied by your
telephone company when you order your ISDN line.
Command:
Sets your switch type to:
AT*W=1
DMS-100 Custom
AT*W=2
National ISDN-1(default)
AT*W=3
National ISDN-2
AT*W=4
5ESS Custom Multipoint
AT*W=5
5ESS Custom Point-to-Point
AT*W=6
Leased Line 64 Kbps (1 B-channel)
AT*W=7
Leased Line 128 Kbps (2 B-channels)
Telephone Numbers
The telephone numbers for your ISDN TA are set using AT*P=n. These numbers are
supplied by your telephone company and are what people dial when they place a data
call to your ISDN TA or to devices connected to your Analog Device Ports.
Command:
Follow the equal sign with:
AT*P0=
Area code
AT*P1=
Telephone number 1 (DN1)
AT*P2=
Telephone number 2 (DN2)
SPIDs
The Service Profile Identifiers (SPID) for your ISDN TA are set using AT*S=. When
set to AutoSPID mode, your ISDN TA attempts to discern its SPIDs automatically.
To set AutoSPID mode:
Command:
Result:
AT*S=0
Disables AutoSPID
AT*S=1
Enables AutoSPID (default)
