A
DVANCED
C
ONFIGURATION
Changing the Data Protocols Used by Your
ISDN TA
To change the data protocols used by your ISDN TA, open
ControlCenter.
Click the Configuration Manager icon, followed by the Advanced
Configuration button. Then click the Data tab.
ControlCenter’s “Data” tab, shown in Figure 5-1, has two sections,
“Incoming Calls” and “Outgoing Calls.”
Remember: The settings in this section affect only data calls. They do
not affect calls to your ISDN TA’s Analog Device Ports.
Figure 5-1 ControlCenter “Data” tab
Incoming Data Calls
To set the options in the “Incoming Calls” section:
1
Click the Incoming Call Protocol drop-down menu. Then click
one of the options to select what sort of calls your ISDN line will
accept.
Note: When set to a protocol, your ISDN TA will accept only
calls made using that protocol.
Options include:
Automatic Protocol Detect – This is the default setting.
Using this setting, your ISDN TA discerns the protocol being
used by an incoming data transmission and adapts to that
protocol.
