US Robotics 3CP3468 User Manual Download Page 101 | Manualshive

Page: 101 / 105

background image

3Com Corporation

3800 Golf Rd.

Rolling Meadows, Illinois

60008

Copyright © 1999, 3Com Corporation. All rights reserved. No part of this documentation may be reproduced in any form or by any means or used to
make any derivative work (such as translation, transformation, or adaptation) without written permission from 3Com Corporation.

3Com Corporation reserves the right to revise this documentation and to make changes in content from time to time without obligation on the part of
3Com Corporation to provide notification of such revision or change.

3Com Corporation provides this documentation without warranty of any kind, either implied or expressed, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. 3Com may make improvements or changes in the product(s) and/or the program(s)
described in this documentation at any time.

UNITED STATES GOVERNMENT LEGENDS:

If you are a United States government agency, then this documentation and the software described herein are provided to you subject to the
following:

United States Government Legend: All technical data and computer software is commercial in nature and developed solely at private expense.
Software is delivered as Commercial Computer Software as defined in DFARS 252.227-7014 (June 1995) or as a commercial item as defined in
FAR 2.101(a) and as such is provided with only such rights as are provided in 3Com’s standard commercial license for the Software. Technical data is
provided with limited rights only as provided in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987), whichever is applicable. You agree not
to remove or deface any portion of any legend provided on any licensed program or documentation contained in, or delivered to you in conjunction with,
this User Guide.

[Portions of this documentation are reproduced in whole or in part with permission from (as appropriate).]

Unless otherwise indicated, 3Com registered trademarks are registered in the United States and may or may not be registered in other countries.

Please amend the following trademark list so that it shows only the trademarks actually used in the guide. Organize in alphabetical order. Verify
3Com and third-party references by using the Notes database HQDB00X/Legal/Trademarks, Patents & Copyright Info.

3Com, the 3Com logo, OfficeConnect, and U.S. Robotics are registered trademarks of 3Com Corporation.

Please amend the following trademark list so that it shows only the trademarks actually used in the guide. Organize products alphabetically
within each vendor, and put vendors in alphabetical order.

Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Other brand and product names may be registered trademarks or trademarks of their respective holders.

«
...
99
100
101
102
103
...
»

Summary of Contents for 3CP3468










































































































Reviews:

No comments

Related manuals for 3CP3468

Brand: 3idee Pages: 7

Brand: Linksys Pages: 2

Brand: Linksys Pages: 2

Brand: cable matters Pages: 8

Brand: Solisto Pages: 12

WPN111 - RangeMax Wireless USB 2.0 Adapter

Brand: NETGEAR Pages: 2

Brand: Titan Electronics Pages: 14

Brand: Zonet Pages: 19

LT30 - XGA DLP Projector

Brand: NEC Pages: 2

Brand: NEC Pages: 7

Brand: NEC Pages: 32

Brand: NEC Pages: 2

Brand: NEC Pages: 46

Brand: NEC Pages: 42

Brand: NEC Pages: 48

Brand: NEC Pages: 62

Brand: NEC Pages: 51

Brand: NEC Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands