DS1068-020B
31
LBT20769
5.4.1
How to enable the Installer
The Installer must have been previously enabled to work on the system. For safety reasons, Installer enabling is cancelled whenever a
User or Master code is entered or when an electronic or proximity key, remote control or wireless keypad is used.
IMPORTANT!
The Installer is automatically enabled each time the system is turned on.
Proceed as follows to enable the Installer:
1.
Access the
MASTER
menu by entering the access code. Press
to confirm;
2.
Select "
System Settings
" by pressing the key associated with the
or
symbol. Press
to confirm;
3.
Select "
Authorisations
" by pressing the key associated with the
or
symbol. Press
to confirm;
4.
Select "
Users
" by pressing the key associated with the
or
symbol. Press
to confirm.
5.
Select "
I : Installer
" by pressing the key associated with the
or
symbol.
6.
Press the key associated with the "AUTHORISATIONS" message
on the display to enable the
INSTALLER
. Press
to
confirm;
= Installer enabled ; = Installer NOT enabled
7.
Press
repeatedly to go back to the upper level menu.
5.4.2
How to enable the technical manager
The Technical Manager must have been previously enabled to work on the system.
For safety reasons, Technical Manager enabling is cancelled whenever a User or Master code is entered or when an electronic or
proximity key, remote control or wireless keypad is used.
IMPORTANT!
The Technical Manager is automatically enabled each time the system is turned on.
Proceed as follows to enable the Technical Manager:
1.
Access the
MASTER
menu by entering the access code. Press
to confirm;
2.
Select "
System Settings
" by pressing the key associated with the
or
symbol. Press
to confirm;
3.
Select "
Authorisations
" by pressing the key associated with the
or
symbol. Press
to confirm;
4.
Select "
Users
" by pressing the key associated with the
or
symbol. Press
to confirm;
5.
Selection “
TM : Technical Manager
" by pressing the key associated with the
or
symbol,
6.
Press the key associated with the "AUTHORISATIONS" message
on the display to enable the
TECH. MANAGER
. Press
to confirm;
= Tech. Manager enabled ; = Tech. Manager NOT enabled
7.
Press
repeatedly to go back to the upper level menu.
5.4.3
How to enable a User
Each User must have been previously enabled to work on the system.
Proceed as follows to enable a user:
1.
Access the
MASTER
menu by entering the access code. Press
to confirm;
2.
Select "
System Settings
" by pressing the key associated with the
or
symbol. Press
to confirm;
3.
Select "
Authorisations
" by pressing the key associated with the
or
symbol. Press
to confirm;
4.
Select "
Users
" by pressing the key associated with the
or
symbol. Press
to confirm;
5.
Select the desired user "
USXX : User X
" by pressing the key associated with the
or
symbol.
6.
Press the key associated with the "AUTHORISATIONS" message
”
on the display to enable the
User
. Press
to confirm;
= User enabled ; = User NOT enabled
7.
Press
repeatedly to go back to the upper level menu.
