DS1068-020B
50
LBT20769
11 QUICK GUIDE TO REMOTE CONTROL
Cut out the following quick reference guides along the lines to keep the list of remote control commands handy at all times. The folded
guide is credit-card-sized to conveniently fit in a wallet or purse.
How to skip a telephone answering machine
Call the control panel number and hang up after the first ring.
Call the control panel back within 30 seconds.
How to manage outputs using text messages
Send a text message to the control panel in the following format:
2 nn s. ,
where
nn
is the two-digit logical number of the
controllable input,
s
is a digit which represents the status that the
output must assume (1=set; 0 =unset).
In case of pulsed commandable output only 1 (set) can be used.
Several controls can be queued in the same text message and
separated by a comma. Each text message must end with a full
stop (“.”).
Guided voice menu
Call the control panel from a DTMF tone phone.
Enter the valid code within 10 seconds.
Follow the vocal instructions.
Press “
*
” to go back to the previous menu or to end remote
control.
How to skip a telephone answering machine
Call the control panel number and hang up after the first ring.
Call the control panel back within 30 seconds.
How to manage outputs using text messages
Send a text message to the control panel in the following format:
2 nn s. ,
where
nn
is the two-digit logical number of the
controllable input,
s
is a digit which represents the status that the
output must assume (1=set; 0 =unset).
In case of pulsed commandable output only 1 (set) can be used.
Several controls can be queued in the same text message and
separated by a comma. Each text message must end with a full
stop (“.”).
Guided voice menu
Call the control panel from a DTMF tone phone.
Enter the valid code within 10 seconds.
Follow the vocal instructions.
Press “
*
” to go back to the previous menu or to end remote
control.
How to skip a telephone answering machine
Call the control panel number and hang up after the first ring.
Call the control panel back within 30 seconds.
How to manage outputs using text messages
Send a text message to the control panel in the following format:
2 nn s. ,
where
nn
is the two-digit logical number of the
controllable input,
s
is a digit which represents the status that the
output must assume (1=set; 0 =unset).
In case of pulsed commandable output only 1 (set) can be used.
Several controls can be queued in the same text message and
separated by a comma. Each text message must end with a full
stop (“.”).
Guided voice menu
Call the control panel from a DTMF tone phone.
Enter the valid code within 10 seconds.
Follow the vocal instructions.
Press “
*
” to go back to the previous menu or to end remote
control.
